Description
Instructions of Use:
-
Wash your face and let it dry, or gently pat it with a towel.
-
Take out the LED Beauty Mask, take out the power control box, and connect the power supply of the mask to the output hole of the power control box.
-
Press the Color Select/Start button to turn it on. The default time shown is 30 minutes. Press the same button again to choose the LED color (Colors 1 through 7 – red, blue, green, yellow, purple, light green, and white. Number 8 is an auto-change color flicker). Set working times (0 to 60 minutes). Do not allow eyes to look directly at LED light for too long. Brightness ( 1 through 9 levels) can be adjusted. Flicker mode can then be set. Press the Microelectronics button to choose the microcurrent intensity (1 through 9 levels).
-
Before placing the mask on the face, please set the intensity to the lowest level and gradually increase it to desired intensity. Once the mask is ready to use, place the mask on the face. Hold both sides, lock-on ears, and adjust the tightness to fit the mask on the face.
-
After completing treatment (recommended 15-30 minutes), the power control box will automatically turn off. Take off the mask and safely place it back in its box.